Telco Protocol and Interface Converters

Telecommunications equipment refers to hardware used mainly for telecommunications such as transmission lines, multiplexers and base transceiver stations. It encompasses different types of communication technologies including telephones, radios and even computers.
TDMoIP-2E1 Dual E1 G703 75/100Ohm Channel TDM over IP 1U units with Console.
TDMoIP-4E1 Quad E1 G703 75/100Ohm Channel TDM over IP 1U units with Console.
TDMoIP-8E1 Octal E1 G703 75/100Ohm Channel TDM over IP 1U units with Console.
TDMoIP-16E1 Hex E1 G703 75/100Ohm Channel TDM over IP 1U units with Console.
NRS232_485F8T RS232/422/485 2/4-Wire to ST Multi-Mode (850nm) fibre Optic Interface Switch – Table Top Unit
NRS232_485F3C RS232/422/485 2/4-Wire to SC Multi-Mode (1300nm) fibre Optic Interface Switch – Table Top Unit
NRS232_485FCS RS232/422/485 2/4-Wire to SC SINGLE-Mode (1300nm) fibre Optic Interface Switch – Table Top Unit
NR485T232RPR RS485/RS232 to Repeater
NIRS232_485F8T Industrial RS485/RS232 to ST Multi-Mode (850nm) fibre Optic Interface Switch [2 & 4-Wire]
NIRS232_485FCS Industrial RS485/RS232 to SC Single-Mode (1310nm) fibre Optic Interface Switch [2 & 4-Wire]
NIRS232RS485 Industrial RS485/RS232 to Repeater
(Add)-DC48 Optional 48 VDC supply for any Telco product.
NE2F3T-4E1 E2 (4x E1’s- G.703) on 1x ST Multi-Mode (1300nm) fibre Optic Interface Multiplexer
NE2F8C-4E1 E2 (4x E1’s- G.703) on 1x SC Multi-Mode (130nm) fibre Optic Interface Multiplexer
NE2F3C-4E1 E2 (4x E1’s- G.703) on 1x SC Multi-Mode (1300nm) fibre Optic Interface Multiplexer
NE2FCS-4E1 E2 (4x E1’s- G.703) on 1x SC Single-Mode (1300nm) fibre Optic Interface Multiplexer
NE2FCS-8E1 E2 (8×E1’s – G.703) PDH Optical Multiplexer on 1x SC Single-Mode Single mode fibre (40Km)
NE3FCS-16E1 E3 (16×E1’s – G.703) PDH Optical Multiplexer on 1x SC Single-Mode Single mode fibre (40Km)
NMUX16E1ETH-AC 16E1″s + 2FE on 1310nm Single Mode Fibre 35KM with SNMP module ans Dual AC supplies
NMUX16E1ETH-DC 16E1″s + 2FE on 1310nm Single Mode Fibre 35KM with SNMP module ans Dual DC supplies
NMUX16E1ETH-M60 1550nm Single Mode Fibre Optic Module 60KM
NMUX16E11ETHM80 1550nm Single Mode Fibre Optic Module 80KM
NG703V11C E1 – G.703 and Co directional 64Kbps to N-times-64 V11/X.21 Interface Converter
NMUXIP2E1 IP Based Ethernet Data Multiplexer to Two 120Ω E1 G703 Interface
NMUXIP4E1 IP Based Ethernet Data Multiplexer to Four 120Ω E1 G703 Interface
NMUXIP8E1 IP Based Ethernet Data Multiplexer to Eight 120Ω E1 G703 Interface
NMUXIP16E1 IP Based Ethernet Data Multiplexer to Sixteen 120Ω E1 G703 Interface
NMUXIP4E1SNMP-M Two 10/100Base-Tx electrical Ethernet ports and One 10/100Base-Fx optical Ethernet port to 16E1 converter with Dual AC/DC power supply.  1U – 19″ Rack mountable, Ethernet SNMP management port and with 4 Universal Slots.  Embedded Cross connection and timing on Multi and Single Mode Fibre.
NRS232-ETH1 1-Port RS232, RS485(2/4-Wire) & RS422 Async Serial (230Kbps) to 10/100Ethernet conversion unit with external supply
NRS232-ETH1-SNMP 1-Port RS232, RS485(2/4-Wire) & RS422 Async Serial (230Kbps) to 10/100Ethernet conversion unit with external supply with SNMP management
NIRS232-ETH1 Industrial 1-Port RS232, RS485(2/4-Wire) & RS422 Async Serial (230Kbps) to 10/100Ethernet conversion unit. No Power supply included.
NQ504SIP Water proof Stainless steel Ip56 rate VoIP gate intercom unit with call, gate control adjustable time relay, Relay to connect to door lock , NO/NC relay mode, speaker and bell, Auto Provision via FTP, TFTP protocol, Directly call to preset telephone, Volume control, Hight quality conversation voice, Full Duplex intercom, Auto Answer , Auto hand down, Powerful Web management.
NQ516SIP Water proof Stainless steel Ip56 rate VoIP gate intercom unit with keypad, call, gate control adjustable time relay, Relay to connect to door lock , NO/NC relay mode, speaker and bell, Auto Provision via FTP, TFTP protocol, Directly call to preset telephone, Volume control, Hight quality conversation voice, Full Duplex intercom, Auto Answer , Auto hand down, Powerful Web management.
NQ700SIP Basic SIP wall mount VoIP Phone Poe 802.3af Powered with, Callhold , call waiting, call forwarding, Conference calling (with or without server),   Calltransfer (blinder consultative), 8 distinctive ring tone, Volume and Ringer level control, Do not disturb, paging/Intercom, Auto answer, Configurable dial plan features.
LATEST NEWS